Enter the sizes of your benchtop, vanity, table or panel. The GFRC mix calculator gives you the bags of MACt premix, the water and fibre for every bag, and a shopping list priced live from our store.
Sizes in millimetres. Everything updates as you type, and your work is kept on this device.
Names: name each piece. The names go on your batch sheet, so we know exactly what you are making.
Drop edge: press + Add a drop edge on the piece. Depth is measured from the top surface down to the bottom of the edge, so a 100 mm drop edge is 100. Thickness is measured from the front face back, such as 50 mm. We recommend the top sits out 25 mm past the cupboards, so the drop edge is 41 mm thick: the 25 mm overhang plus 16 mm sitting on the carcass, for the best strength.
Cut-outs: add one for each sink or cooktop, with its size. They come off the area.
Basins and hollow shapes: enter the base and each wall as its own piece, or send us the drawing in step 5.
Enter a piece's sizes to see it in 3D.
Drag to turn it. Scroll or pinch to zoom. Cut-outs are spread along the piece. Finishes: White and Grey premix, and Charcoal (grey premix with Black Onyx Oxide); the colour on screen is a guide only.
White premix keeps colours clean and true; grey gives deeper, earthier versions of the same oxides. Oxide stiffens the mix at higher doses: bring the flow back with plasticiser, never water. Blending two oxides? Add a line for each. See all 20 colours on our iron oxide page.
Live prices from our online store, inc GST. Freight is quoted to your postcode.
Enter your name and email, and we will email you the batch sheet as a PDF: every piece with its 3D view, plan, section and mould cutting list, both mixes with tick boxes, the batch logs and your shopping list. A copy comes to our team, so we can check it and help.
Upload it with your details: a kitchen plan, a sketch with sizes or a photo. We will work out the pieces, the bags and the price for you.
Print it here too once you have sent your details.
The batch sheet has every piece in 3D with its plan and mould cutting list, both mixes with tick boxes, a batch log and your shopping list.
Prefer the phone? Call us on 07 3111 4047.
Email your list, and attach your plan, to sales@mact.au.
Email the List to MACtMeasure each piece in millimetres. 25 mm is the usual thickness for a kitchen benchtop, and 20 mm the least.
Add sink and cooktop cut-outs, and a drop edge for a deeper-looking front. Waterfall ends go in as their own piece.
Silica-Free Premix for benchtops, vanities, tables and panels; SCC Premix for basins and vessels. Add oxide from your 1 kg samples.
One bag at a time: a 2 to 3 mm face coat with no 13 mm fibre, then the backing with the full card. Test a small batch first.
Fill pinholes with MACt Grout Mix, sand, then seal with Trinic H13, the benchtop sealer we recommend.
Order online, or email the list to us with your postcode for a freight price.
Not sure about a size or a detail? Send us your plan and we will check the numbers.
It adds up the volume of every piece, takes off the cut-outs, adds your waste allowance and divides by what one 20 kg bag makes: about 10.2 L of mix for Silica-Free Premix and 12.0 L for SCC Premix. Those come from measured wet densities. It always rounds up to whole bags.
MACt Silica-Free Premix for benchtops, vanity tops, tables and wall panels, in grey or white. MACt SCC Premix for basins, vessels and detailed moulds: it flows into shape, and its plasticiser is already in the bag.
The 3 mm HD fibre goes into every mix and controls fine cracking. The 13 mm AR fibre is the reinforcement and goes into the backing only, so no strands reach the show face. Structural tops can take 600 g of 13 mm fibre a bag.
They are our starting point at about 23 °C. Run a small test batch first. On hot days, MACt Concrete Retarder Pro gives you more working time.
There is no set amount. Less oxide gives a lighter colour and more gives a stronger, more vibrant one, depending on the oxide and the premix colour. Make three or four 1 kg samples from light to strong, choose from the cured, sealed samples, and enter that oxide weight: the calculator multiplies it by 20 for each bag.
Trinic H13, the food-safe matte sealer we recommend for benchtops and tables. Trinic rates one 1.4 L kit at about 21 m². Our benchtop kits also come with MACt Seal.
Yes. Upload your plan, drawing or a photo with sizes in the form under your shopping list, or email it to sales@mact.au, and we will work out the pieces, the bags and the price.
Yes, Australia-wide. Pick-up from our Banyo warehouse is free, 7:30 am to 3:30 pm weekdays. Email your list and postcode for a freight price.
Measured figures for MACt premix, per 20 kg bag.
Silica-Free Premix
about 10.2 L of mix
SCC Premix
about 12.0 L of mix
Silica-Free at 25 mm
about 0.41 m² a bag
A 25 mm top
about 57 kg per m²
Trinic H13
about 21 m² a 1.4 L kit
Benchtops and vanities: Silica-Free Premix, grey or white, cast with a face coat and a backing.
Basins and vessels: SCC Premix, which flows into detailed moulds with its plasticiser already in the bag.
Tables and panels: the same premix, with 600 g of 13 mm fibre a bag for structural pieces.
Bigger jobs: a pallet of 56 bags, priced in our online store, as soon as it costs less than single bags.


Shop online, or send us your list and postcode and we will price the freight.